China OEM Replacement Filter Pricelist – JXY type waste heat regeneration dryer – Juxian
China OEM Replacement Filter Pricelist – JXY type waste heat regeneration dryer – Juxian Detail:
Working principle
Waste heat regenerative dryer is a new type adsorption dryer, neither belongs to the regenerative heat, also don’t belong to no heat regenerative, and belongs to the temperature swing adsorption, is the use of high temperature air compressor exhaust heat regeneration desiccant, adsorbent is completely regenerate, even in low pressure 0.35 Mpa working condition of use, as long as the compressor load rate of not less than 70%, The drying device can work reliably, so it can make full use of its own energy and has energy-saving effect.The electric heater of the micro-heat regenerative dryer is cancelled. At the same time, the waste heat regenerative compressed air dryer is a new type of energy-saving compressed air drying equipment because there is no gas consumption during heating and regeneration.
Technical indicators
| Working pressure | 1.3-1.0mpa |
| Inlet temperature | ≥100℃ |
| Finished gas atmospheric pressure dew point | ≤-40℃ (alumina) ≤-52℃(molecular sieve) |
| Control mode | microcomputer automatic control |
| Working cycle | 6-8h |
| Regenerated steam consumption | ≤2% |
Technical characteristics
1. using the world’s advanced microcomputer controller, can realize communication and linkage control, excellent performance.
2. choose high quality butterfly valve, switching quickly, accurate and reliable action.
3. the use of gas diffusion device, uniform air distribution in the tower, unique filling method, long service life of the adsorbent.
4. The regeneration process uses the waste heat of air compressor, and the regeneration energy consumption is low.
5. the overall layout is reasonable, compact structure, simple installation, convenient use and maintenance.
Waste heat regeneration air dryer technical parameters table
|
Model |
Traffic Nm3/min |
Inlet and outlet diameter mm |
Total weight kg |
Overall dimensions L * W * H mm |
Power supply/power
|
|
JXY-100/8 |
100 |
150 |
7400 |
3850 * 2260 * 3200 |
220V/50Hz 100 w or less |
|
JXY-150/8 |
150 |
200 |
10700 |
4400 * 2600 * 3500 |
|
|
JXY-200/8 |
200 |
200 |
13400 |
4900 * 2700 * 3800 |
|
|
JXY-250/8 |
250 |
200 |
17050 |
5400 * 3100 * 3820 |
|
|
JXY-300/8 |
300 |
250 |
19400 |
5900 * 3200 * 3900 |
|
|
JXY-350/8 |
350 |
250 |
22000 |
6200 * 3200 * 4360 |
|
|
JXY-400/8 |
400 |
250 |
25500 |
7100 * 2900 * 4300 |
|
|
JXY-600/8 |
600 |
350 |
36000 |
8400 * 3300 * 4760 |
Process flow chart
Product detail pictures:
Related Product Guide:
The organization keeps on the procedure concept "scientific management, high quality and efficiency primacy, purchaser supreme for China OEM Replacement Filter Pricelist – JXY type waste heat regeneration dryer – Juxian , The product will supply to all over the world, such as: Tajikistan, Kenya, Philippines, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
By Louis from Surabaya - 2018.12.28 15:18
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Dinah from Oman - 2018.11.04 10:32
