China OEM Air Filter Element Manufacturers – JXW no heat regenerative dryer – Juxian
China OEM Air Filter Element Manufacturers – JXW no heat regenerative dryer – Juxian Detail:
Product introduction
No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.
It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.
Technical characteristics
1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.
2. the use of microcomputer control, digital display of two towers alternately running state.
3. to ensure the stable and reliable dew point of finished products, low energy consumption.
4. simple and generous structure, humanized design, easy to operate and maintain.
5. a variety of fault alarm function.
6. advanced variable program, stable and reliable operation.
Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.
Technical indicators
Working pressure | 0.6-1.0mpa (1.0-1.3mpa upon request) |
Inlet temperature | < 50℃ |
Dew point of finished product | ≤-40℃(alumina)≤-52℃ (molecular sieve) |
Regeneration gas consumption | ≤10% |
Pressure loss | ≤ 0.02mpa |
Operation period | 10 minutes |
Technical parameters
Model |
Rated capacity (after Nm/h) |
Nominal inlet diameter DN (mm) |
Floor area size (mm) |
JXW-1 |
1.2 |
25 |
780 times 320 times 1370 |
JXW-2 |
2.4 |
25 |
820 * 320 * 1470 |
JXW-3 |
3.6 |
32 |
920 * 350 * 1590 |
JXW-6 |
6.8 |
40 |
1040 times 420 times 1820 |
JXW-10 |
10.9 |
50 |
1200 * 500 * 2150 |
JXW-16 |
16.5 |
65 |
1420 times 550 times 2500 |
JXW-20 |
22 |
65 |
1560 * 650 * 2500 |
JXW-30 |
32 |
80 |
1750 times 700 times 2530 |
JXW-40 |
43.5 |
100 |
1840 * 900 * 2550 |
JXW-50 |
53 |
100 |
1920 * 900 * 2680 |
JXW-60 |
65 |
125 |
2100 * 1000 * 2870 |
JXW-80 |
85 |
150 |
2520 * 1200 * 2820 |
JXH-100 |
108 |
150 |
2600 * 1200 * 2950 |
JXW-150 |
160 |
200 |
3000 * 1400 * 3170 |
JXW-200 |
210 |
200 |
3700 * 2000 * 3300 |
Product detail pictures:

Related Product Guide:
Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers' demands for China OEM Air Filter Element Manufacturers – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Irish, Portugal, South Korea, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
