China OEM China 0.3micron Filter Suppliers – JXW no heat regenerative dryer – Juxian

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

continue on to further improve, to make sure product top quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for Surge Tank, Storage Tank, Nitrogen Gas Generator, We respect your enquiry and it truly is our honor to operate with each friend around the world.
China OEM China 0.3micron Filter Suppliers – JXW no heat regenerative dryer – Juxian Detail:

Product introduction

No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.

It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.

Technical characteristics

1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.

2. the use of microcomputer control, digital display of two towers alternately running state.

3. to ensure the stable and reliable dew point of finished products, low energy consumption.

4. simple and generous structure, humanized design, easy to operate and maintain.

5. a variety of fault alarm function.

6. advanced variable program, stable and reliable operation.

Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.

Technical indicators

Working pressure  0.6-1.0mpa (1.0-1.3mpa upon request)
Inlet temperature  < 50℃
Dew point of finished product  ≤-40℃(alumina)≤-52℃ (molecular sieve)
Regeneration gas consumption  ≤10%
Pressure loss  ≤ 0.02mpa
Operation period  10 minutes

Technical parameters

Model

Rated capacity

(after Nm/h)

Nominal inlet diameter DN (mm)

Floor area size (mm)

JXW-1

1.2

25

780 times 320 times 1370

JXW-2

2.4

25

820 * 320 * 1470

JXW-3

3.6

32

920 * 350 * 1590

JXW-6

6.8

40

1040 times 420 times 1820

JXW-10

10.9

50

1200 * 500 * 2150

JXW-16

16.5

65

1420 times 550 times 2500

JXW-20

22

65

1560 * 650 * 2500

JXW-30

32

80

1750 times 700 times 2530

JXW-40

43.5

100

1840 * 900 * 2550

JXW-50

53

100

1920 * 900 * 2680

JXW-60

65

125

2100 * 1000 * 2870

JXW-80

85

150

2520 * 1200 * 2820

JXH-100

108

150

2600 * 1200 * 2950

JXW-150

160

200

3000 * 1400 * 3170

JXW-200

210

200

3700 * 2000 * 3300


Product detail pictures:

China OEM China 0.3micron Filter Suppliers –  JXW no heat regenerative dryer –  Juxian detail pictures


Related Product Guide:

Each individual member from our large performance revenue crew values customers' needs and company communication for China OEM China 0.3micron Filter Suppliers – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Saudi Arabia, Jamaica, Angola, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
  • This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Georgia from Jeddah - 2018.11.22 12:28
    We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
    5 Stars By Antonia from Finland - 2018.11.28 16:25
    Write your message here and send it to us