China OEM Compressed Air Supplies Manufacturer – JXZ type combined low dew point dryer – Juxian
China OEM Compressed Air Supplies Manufacturer – JXZ type combined low dew point dryer – Juxian Detail:
The working principle of
Combined low dew point dryer (short for: combined dryer) is a low dew point drying equipment integrating freezing dryer and adsorption dryer.The refrigerated dryer has the advantages of no gas loss and low energy consumption, but it has the limitation of dew point temperature.The dryer has the advantage of low dew point, but the disadvantage of large loss of recycled gas.The combined low dew point dryer developed by our company integrates the respective advantages of cold drying machine and suction drying machine, maximizes the advantages of both through reasonable pipeline connection and capacity collocation, and achieves the highest cost performance.
Combined dryers are mainly composed of frozen dryers and adsorption dryers, and sometimes attached with corresponding filtration, dust removal, oil removal and other devices, so that the dryer can adapt to more complex gas environment.
Technical characteristics
● Part of the cold drying machine using refrigeration dehumidification, air cyclone separation process.The drying machine adopts pressure swing adsorption, temperature change adsorption and other processes.If there are corresponding filtration, dust removal, oil removal and other devices, there are direct interception, inertial collision, gravity settlement and other filtering mechanisms.
● Stable operation, reliable work, long-term unguarded operation.
● The regenerative heat source (the part of the drying machine is slightly heated) adopts electric heating, and the regenerative steps adopt heating + blowing cooling.
● Using its own dry air as a renewable gas source, low gas consumption.
● Long cycle switching.
● Automatic operation, unattended operation.
● Reasonable configuration of refrigeration system components, low failure rate.
● Adopt electronic intelligent or floating ball type automatic sewage device to realize automatic sewage function.
● Simple process flow, low failure rate, low investment cost.
● Easy to operate and maintain.
● Simple electrical automation operation, with main operating parameters indication, and the necessary fault alarm.
● Machine factory, no indoor base installation.
● Convenient pipeline pairing and installation.
Technical indicators
| Air handling capacity | 1~Nm3/min |
| Working pressure | 0.6 ~ 1.0mpa (7.0~ 3.0mpa products can be provided according to user requirements) |
| Air inlet temperature | normal temperature type: ≤45℃(Min 5℃); |
| high temperature type:≤80℃(Min 5℃) | |
| Cooling mode | air cooled/water cooled |
| Dew point of finished product | -40℃~-70℃(atmospheric dew point) |
| Inlet and outlet air pressure drop | ≤ 0.03mpa |
| Switching time | 120min(adjustable)(slight heat) 300~600s(adjustable)(no heat) |
| Regenerated gas consumption | 3~ 6% rated capacity |
| Regeneration method | micro thermal regeneration/non thermal regeneration/other |
| Power source | AC 380V/3P/50Hz(ZCD-15 and above);AC 220V/1P/50Hz(ZCD-12 and below) |
| Ambient temperature | ≤42℃ |
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for China OEM Compressed Air Supplies Manufacturer – JXZ type combined low dew point dryer – Juxian , The product will supply to all over the world, such as: San Diego, Sacramento, azerbaijan, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Marco from Dominica - 2018.12.30 10:21
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Nainesh Mehta from Adelaide - 2018.06.12 16:22
