China OEM Medical Products Supplier – JXW no heat regenerative dryer – Juxian
China OEM Medical Products Supplier – JXW no heat regenerative dryer – Juxian Detail:
Product introduction
No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.
It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.
Technical characteristics
1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.
2. the use of microcomputer control, digital display of two towers alternately running state.
3. to ensure the stable and reliable dew point of finished products, low energy consumption.
4. simple and generous structure, humanized design, easy to operate and maintain.
5. a variety of fault alarm function.
6. advanced variable program, stable and reliable operation.
Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.
Technical indicators
| Working pressure | 0.6-1.0mpa (1.0-1.3mpa upon request) |
| Inlet temperature | < 50℃ |
| Dew point of finished product | ≤-40℃(alumina)≤-52℃ (molecular sieve) |
| Regeneration gas consumption | ≤10% |
| Pressure loss | ≤ 0.02mpa |
| Operation period | 10 minutes |
Technical parameters
|
Model |
Rated capacity (after Nm/h) |
Nominal inlet diameter DN (mm) |
Floor area size (mm) |
|
JXW-1 |
1.2 |
25 |
780 times 320 times 1370 |
|
JXW-2 |
2.4 |
25 |
820 * 320 * 1470 |
|
JXW-3 |
3.6 |
32 |
920 * 350 * 1590 |
|
JXW-6 |
6.8 |
40 |
1040 times 420 times 1820 |
|
JXW-10 |
10.9 |
50 |
1200 * 500 * 2150 |
|
JXW-16 |
16.5 |
65 |
1420 times 550 times 2500 |
|
JXW-20 |
22 |
65 |
1560 * 650 * 2500 |
|
JXW-30 |
32 |
80 |
1750 times 700 times 2530 |
|
JXW-40 |
43.5 |
100 |
1840 * 900 * 2550 |
|
JXW-50 |
53 |
100 |
1920 * 900 * 2680 |
|
JXW-60 |
65 |
125 |
2100 * 1000 * 2870 |
|
JXW-80 |
85 |
150 |
2520 * 1200 * 2820 |
|
JXH-100 |
108 |
150 |
2600 * 1200 * 2950 |
|
JXW-150 |
160 |
200 |
3000 * 1400 * 3170 |
|
JXW-200 |
210 |
200 |
3700 * 2000 * 3300 |
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as theory of "quality the basic, have faith in the initial and administration the advanced" for China OEM Medical Products Supplier – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Tanzania, Borussia Dortmund, Estonia, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Ellen from Chicago - 2018.02.12 14:52
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Matthew Tobias from Singapore - 2018.05.22 12:13
