China OEM Oxyhydrogen Gas Boiler Manufacturer – JXY type waste heat regeneration dryer – Juxian
China OEM Oxyhydrogen Gas Boiler Manufacturer – JXY type waste heat regeneration dryer – Juxian Detail:
Working principle
Waste heat regenerative dryer is a new type adsorption dryer, neither belongs to the regenerative heat, also don’t belong to no heat regenerative, and belongs to the temperature swing adsorption, is the use of high temperature air compressor exhaust heat regeneration desiccant, adsorbent is completely regenerate, even in low pressure 0.35 Mpa working condition of use, as long as the compressor load rate of not less than 70%, The drying device can work reliably, so it can make full use of its own energy and has energy-saving effect.The electric heater of the micro-heat regenerative dryer is cancelled. At the same time, the waste heat regenerative compressed air dryer is a new type of energy-saving compressed air drying equipment because there is no gas consumption during heating and regeneration.
Technical indicators
| Working pressure | 1.3-1.0mpa |
| Inlet temperature | ≥100℃ |
| Finished gas atmospheric pressure dew point | ≤-40℃ (alumina) ≤-52℃(molecular sieve) |
| Control mode | microcomputer automatic control |
| Working cycle | 6-8h |
| Regenerated steam consumption | ≤2% |
Technical characteristics
1. using the world’s advanced microcomputer controller, can realize communication and linkage control, excellent performance.
2. choose high quality butterfly valve, switching quickly, accurate and reliable action.
3. the use of gas diffusion device, uniform air distribution in the tower, unique filling method, long service life of the adsorbent.
4. The regeneration process uses the waste heat of air compressor, and the regeneration energy consumption is low.
5. the overall layout is reasonable, compact structure, simple installation, convenient use and maintenance.
Waste heat regeneration air dryer technical parameters table
|
Model |
Traffic Nm3/min |
Inlet and outlet diameter mm |
Total weight kg |
Overall dimensions L * W * H mm |
Power supply/power
|
|
JXY-100/8 |
100 |
150 |
7400 |
3850 * 2260 * 3200 |
220V/50Hz 100 w or less |
|
JXY-150/8 |
150 |
200 |
10700 |
4400 * 2600 * 3500 |
|
|
JXY-200/8 |
200 |
200 |
13400 |
4900 * 2700 * 3800 |
|
|
JXY-250/8 |
250 |
200 |
17050 |
5400 * 3100 * 3820 |
|
|
JXY-300/8 |
300 |
250 |
19400 |
5900 * 3200 * 3900 |
|
|
JXY-350/8 |
350 |
250 |
22000 |
6200 * 3200 * 4360 |
|
|
JXY-400/8 |
400 |
250 |
25500 |
7100 * 2900 * 4300 |
|
|
JXY-600/8 |
600 |
350 |
36000 |
8400 * 3300 * 4760 |
Process flow chart
Product detail pictures:
Related Product Guide:
It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for China OEM Oxyhydrogen Gas Boiler Manufacturer – JXY type waste heat regeneration dryer – Juxian , The product will supply to all over the world, such as: El Salvador, Tunisia, Turkmenistan, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we are going to be pleased to serve you.
By Betty from UK - 2017.03.07 13:42
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Rita from Montreal - 2018.06.28 19:27
