China OEM Stainless Filter Manufacturers – JXY type waste heat regeneration dryer – Juxian
China OEM Stainless Filter Manufacturers – JXY type waste heat regeneration dryer – Juxian Detail:
Working principle
Waste heat regenerative dryer is a new type adsorption dryer, neither belongs to the regenerative heat, also don’t belong to no heat regenerative, and belongs to the temperature swing adsorption, is the use of high temperature air compressor exhaust heat regeneration desiccant, adsorbent is completely regenerate, even in low pressure 0.35 Mpa working condition of use, as long as the compressor load rate of not less than 70%, The drying device can work reliably, so it can make full use of its own energy and has energy-saving effect.The electric heater of the micro-heat regenerative dryer is cancelled. At the same time, the waste heat regenerative compressed air dryer is a new type of energy-saving compressed air drying equipment because there is no gas consumption during heating and regeneration.
Technical indicators
Working pressure | 1.3-1.0mpa |
Inlet temperature | ≥100℃ |
Finished gas atmospheric pressure dew point | ≤-40℃ (alumina) ≤-52℃(molecular sieve) |
Control mode | microcomputer automatic control |
Working cycle | 6-8h |
Regenerated steam consumption | ≤2% |
Technical characteristics
1. using the world’s advanced microcomputer controller, can realize communication and linkage control, excellent performance.
2. choose high quality butterfly valve, switching quickly, accurate and reliable action.
3. the use of gas diffusion device, uniform air distribution in the tower, unique filling method, long service life of the adsorbent.
4. The regeneration process uses the waste heat of air compressor, and the regeneration energy consumption is low.
5. the overall layout is reasonable, compact structure, simple installation, convenient use and maintenance.
Waste heat regeneration air dryer technical parameters table
Model |
Traffic Nm3/min |
Inlet and outlet diameter mm |
Total weight kg |
Overall dimensions L * W * H mm |
Power supply/power
|
JXY-100/8 |
100 |
150 |
7400 |
3850 * 2260 * 3200 |
220V/50Hz 100 w or less |
JXY-150/8 |
150 |
200 |
10700 |
4400 * 2600 * 3500 |
|
JXY-200/8 |
200 |
200 |
13400 |
4900 * 2700 * 3800 |
|
JXY-250/8 |
250 |
200 |
17050 |
5400 * 3100 * 3820 |
|
JXY-300/8 |
300 |
250 |
19400 |
5900 * 3200 * 3900 |
|
JXY-350/8 |
350 |
250 |
22000 |
6200 * 3200 * 4360 |
|
JXY-400/8 |
400 |
250 |
25500 |
7100 * 2900 * 4300 |
|
JXY-600/8 |
600 |
350 |
36000 |
8400 * 3300 * 4760 |
Process flow chart
Product detail pictures:
Related Product Guide:
Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for China OEM Stainless Filter Manufacturers – JXY type waste heat regeneration dryer – Juxian , The product will supply to all over the world, such as: Cape Town, San Diego, Sevilla, We hope to have long-term cooperation relationships with our clients. If you are interested in any of our products, please do not hesitate to send enquiry to us/company name. We ensure that you can be totally satisfied with our best solutions!
By Helen from Paraguay - 2017.10.13 10:47
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By John from Lesotho - 2017.09.16 13:44