China OEM Stainless Steelfilter Manufacturers – JXW no heat regenerative dryer – Juxian
China OEM Stainless Steelfilter Manufacturers – JXW no heat regenerative dryer – Juxian Detail:
Product introduction
No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.
It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.
Technical characteristics
1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.
2. the use of microcomputer control, digital display of two towers alternately running state.
3. to ensure the stable and reliable dew point of finished products, low energy consumption.
4. simple and generous structure, humanized design, easy to operate and maintain.
5. a variety of fault alarm function.
6. advanced variable program, stable and reliable operation.
Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.
Technical indicators
| Working pressure | 0.6-1.0mpa (1.0-1.3mpa upon request) |
| Inlet temperature | < 50℃ |
| Dew point of finished product | ≤-40℃(alumina)≤-52℃ (molecular sieve) |
| Regeneration gas consumption | ≤10% |
| Pressure loss | ≤ 0.02mpa |
| Operation period | 10 minutes |
Technical parameters
|
Model |
Rated capacity (after Nm/h) |
Nominal inlet diameter DN (mm) |
Floor area size (mm) |
|
JXW-1 |
1.2 |
25 |
780 times 320 times 1370 |
|
JXW-2 |
2.4 |
25 |
820 * 320 * 1470 |
|
JXW-3 |
3.6 |
32 |
920 * 350 * 1590 |
|
JXW-6 |
6.8 |
40 |
1040 times 420 times 1820 |
|
JXW-10 |
10.9 |
50 |
1200 * 500 * 2150 |
|
JXW-16 |
16.5 |
65 |
1420 times 550 times 2500 |
|
JXW-20 |
22 |
65 |
1560 * 650 * 2500 |
|
JXW-30 |
32 |
80 |
1750 times 700 times 2530 |
|
JXW-40 |
43.5 |
100 |
1840 * 900 * 2550 |
|
JXW-50 |
53 |
100 |
1920 * 900 * 2680 |
|
JXW-60 |
65 |
125 |
2100 * 1000 * 2870 |
|
JXW-80 |
85 |
150 |
2520 * 1200 * 2820 |
|
JXH-100 |
108 |
150 |
2600 * 1200 * 2950 |
|
JXW-150 |
160 |
200 |
3000 * 1400 * 3170 |
|
JXW-200 |
210 |
200 |
3700 * 2000 * 3300 |
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for China OEM Stainless Steelfilter Manufacturers – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Tajikistan, Johannesburg, Argentina, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
By Elaine from French - 2017.09.09 10:18
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Klemen Hrovat from Pretoria - 2018.06.03 10:17
